Set Accounting {Dot1X | Mac | Web - 3Com 3CRWX120695A Command Reference Manual

set accounting
{dot1x | mac | web}
Defaults — Accounting is disabled for all users by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For network users with start-stop accounting whose records
are sent to a RADIUS server, MSS sends interim updates to the RADIUS
server when the user roams.
Examples — The following command issues start-and-stop accounting
records at the local WX database for administrator Natasha, when she
accesses the switch using Telnet or Web Manager:
WX4400# set accounting admin Natasha start-stop local
success: change accepted.
See Also
"clear accounting" on page 165
"display accounting statistics" on page 182
Sets up accounting services for specified wireless users with network
access, and defines the accounting records and where they are sent.
Syntax —
set accounting {dot1x | mac | web} {ssid ssid-name |
wired} {user-glob | mac-addr-glob} {start-stop | stop-only}
method1 [method2] [method3] [method4]
— Users with network access through the WX switch who are
dot1x
authenticated by 802.1X.
— Users with network access through the WX switch who are
mac
authenticated by MAC authentication
— Users with network access through the WX switch who are
web
authenticated by Web AAA
ssid ssid-name
To apply the rule to all SSIDs, type any.
— Applies this accounting rule specifically to users who are
wired
authenticated on a wired authentication port.
— Single user or set of users with administrative access or
user-glob
network access.

set accounting {dot1x | mac | web}

— SSID name to which this accounting rule applies.
187