Set Spantree Priority - 3Com 3CRWX120695A Command Reference Manual

340 C 10: STP C
HAPTER
set spantree
priority
OMMANDS
Defaults — The default STP priority for all network ports is 128.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command sets the priority of ports 3 and 4 to
48 on VLAN mauve:
WX1200# set spantree portvlanpri 3-4 priority 48 vlan mauve
success: change accepted.
See Also
"clear spantree portpri" on page 317
"clear spantree portvlanpri" on page 318
"display spantree" on page 320
"set spantree portpri" on page 337
Changes the STP root bridge priority of a wireless LAN switch on one or
all of its VLANs.
Syntax —
set spantree priority value {all | vlan vlan-id}
priority value
through 65,535. The bridge with the lowest priority value is elected to
be the root bridge for the spanning tree.
— Changes the bridge priority on all VLANs.
all
vlan vlan-id
priority on only the specified VLAN.
Defaults — The default root bridge priority for the switch on all VLANs is
32,768.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command sets the bridge priority of VLAN
pink to 69:
WX4400# set spantree priority 69 vlan pink
success: change accepted.
— Priority value. You can specify a value from 0
— VLAN name or number. MSS changes the bridge