Set Service-Profile Psk-Raw - 3Com 3CRWX120695A Command Reference Manual

304 C 9: M
HAPTER ANAGED
set service-profile
psk-raw
A P C
CCESS OINT OMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — MSS converts the passphrase into a 256-bit binary number for
system use and a raw hexadecimal key to store in the WX switch's
configuration. Neither the binary number nor the passphrase itself is ever
displayed in the configuration.
To use PSK authentication, you must enable it and you also must enable
the WPA IE.
Examples — The following command configures service profile sp3 to
use passphrase "1234567890123<>?=+&% The quick brown fox jumps
over the lazy sl":
WX4400# set service-profile sp3 psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
See Also
"set mac-user attr" on page 207
"set service-profile auth-psk" on page 298
"set service-profile psk-raw" on page 304
"set service-profile wpa-ie" on page 312
Configures a raw hexadecimal preshared key (PSK) to use for
authenticating WPA clients, in a service profile. Radios use the PSK as a
pairwise master key (PMK) to derive unique pairwise session keys for
individual WPA clients.
Syntax —
set service-profile name psk-raw hex
— Service profile name.
name
— A 64-bit ASCII string representing a 32-digit hexadecimal
hex
number. Enter the two-character ASCII form of each hexadecimal
number.
Defaults — None.
Examples — Enabled.