3Com 3CRWX120695A Command Reference Manual page 75

802.11b/g radios in models MP-52, MP-252, and MP-262, and MP-352,
is 802.11g in regulatory domains that support 802.11g, or 802.11b in
regulatory domains that do not support 802.11g.
MAP radios configured for 802.11g also allow associations from 802.11b
clients by default. To disable support for 802.11b associations, use the
set radio-profile 11g-only command on the radio profile that contains
the radio.
MAP model MP-262 requires an external antenna for the 802.11b/g
radio. You must specify the antenna model. MAP models MP-341 and
MP-352 have an internal 802.1b/g antenna as well as a connector for an
external antenna, so use of an external antenna is optional on these
models. To specify the model, use the set {ap | dap} radio antennatype
command.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command configures Distributed MAP 1 for
MAP model AP2750 with serial-ID M9DE48B012F00:
WX4400# set dap 1 serial-id M9DE48B012F00 model ap2750
success: change accepted.
The following command removes Distributed MAP 1:
WX4400# clear dap 1
This will clear specified DAP devices.
Would you like to continue? (y/n) [n]y
See Also
"clear dap" on page 58
"clear port type" on page 61
"set port type ap" on page 82
"set radio-profile 11g-only" on page 275
"set system countrycode" on page 51
set dap 75