Set Authentication Last-Resort - 3Com 3CRWX120695A Command Reference Manual

set authentication
last-resort
Configures an authentication rule to grant network access to a user who
is not otherwise granted or denied access by 802.1X, or granted access
by MAC authentication.
Syntax —

set authentication last-resort

{ssid ssid-name | wired} method1 [method2] [method3]
[method4]
ssid ssid-name
applies. To apply the rule to all SSIDs, type any.
— Applies this authentication rule specifically to users
wired
connected to a wired authentication port.
method1, method2, method3, method4
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.
A method can be one of the following:
— Uses the local database of usernames and user groups on
local
the WX switch for authentication.
server-group-name
for authentication. You can enter up to four names of existing
RADIUS server groups as methods.
For more information, see "Usage."
Defaults — By default, authentication is unconfigured for all clients with
network access through MAP ports or wired authentication ports on the
WX switch. Connection, authorization, and accounting are also disabled
for these users. When using RADIUS for authentication, a last-resort
user's default authorization password is 3Com.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You can configure different authentication methods for
different groups of users by "globbing." (For details, see "User Globs" on
page 24.)
You can configure a rule either for wireless access to an SSID, or for wired
access through a WX switch's wired authentication port. If the rule is for
— SSID name to which this authentication rule
— Uses the defined group of RADIUS servers
set authentication last-resort
— At least one of up to four
197