3Com 3CRWX120695A Command Reference Manual page 454

454 C 17: RF D
HAPTER
C
ETECTION OMMANDS
Only one MAC address is listed for each 3Com radio, even if the radio is
beaconing multiple SSIDs.
Examples — The following command shows the devices detected by this
WX switch during the most recent RF detection scan:
WX1200# display rfdetect data
Total number of entries: 7
BSSID
-----------------
00:06:25:09:39:4a
00:06:25:51:e9:ff
00:06:25:51:e9:ff
00:0b:0e:00:00:00
00:0b:0e:00:02:00
00:0b:0e:00:02:00
00:0b:0e:00:02:01
Table 86 describes the fields in this display.
Table 86 display rfdetect data Output
Field
BSSID
Port/Rad
Chan
RSSI
Age
SSID
See Also
"display rfdetect mobility-domain" on page 455
"display rfdetect visible" on page 457
Port/Rad
-------- ------
5/1
4/1
5/1
4/1
4/1
5/1
4/1
Description
BSSID detected by a MAP radio on this WX switch.
MAP and radio MAP that detected the BSSID.
For a directly connected MAP, the MAP port number and
radio number are listed. For a Distributed MAP, the
connection number and radio number are listed.
Number of the channel on which the MAP radio detected
the BSSID.
Received signal strength indication (RSSI) — the strength of
the RF signal detected by the MAP radio, in decibels referred
to 1 milliwatt (dBm).
Age of the rogue listing, in seconds. Rogues age out of the
rogue list after one minute.
Service set identifier (SSID) associated with the BSSID.
Chan RSSI Age SSID
---- --- --------
3 0 15 rack29-hostap
10 -85 15 Arrow
10 -84 15 Arrow
1 -78 15 gary-eng
11 -76 15 public
11 -74 15 public
56 -68 15 public