Commands By Usage; Clear Mobility-Domain - 3Com 3CRWX120695A Command Reference Manual

8
Commands by
Usage
clear
mobility-domain
M
OBILITY
Use Mobility Domain commands to configure and manage Mobility
Domain groups.
A Mobility Domain is a system of WX switches and MAP access points
working together to support a roaming user (client). One WX switch acts
as a seed switch, which maintains and distributes a list of IP addresses of
the domain members.
3Com recommends that you run the same MSS version on all the WX
switches in a Mobility Domain.
This chapter presents Mobility Domain commands alphabetically. Use
Table 41 to locate commands in this chapter based on their use.
Table 41 Mobility Domain Commands by Usage
Type
Mobility Domain
Clears all Mobility Domain configuration and information from a WX
switch, regardless of whether the WX switch is a seed or a member of a
Mobility Domain.
D
OMAIN
Command
"set mobility-domain mode seed domain-name" on
page 228
"set mobility-domain member" on page 226
"set mobility-domain mode member seed-ip" on page 227
"display mobility-domain status" on page 225
"display mobility-domain config" on page 225
"clear mobility-domain member" on page 224
"clear mobility-domain" on page 223
C
OMMANDS