Check Of Recognized Addresses; Check Mode - Panasonic S-LINK V User Manual

Starting

Check of Recognized Addresses

Set the mode selector switch to CHECK. In the CHECK mode, the number of connected PLC I/O connectors,
number of connected nodes (number of connected I/O units), and recognized addresses will be displayed.

CHECK mode

Operation
Set the mode selection switch
to CHECK.
Press key.
Press
key.
Press
key.
Repeatedly press this key to
display all the connected con-
necotrs
Press key.
Press key.
Repeatedly press this key to
display all the connected con-
necotrs
key to display the numbers in the reversed order.
Notes: 1) Use
2) Press and hold SELECT key (
3) If the unit is the I/O mixed type, only the input addresses will appear.
Example: In the decimal number display
Number of PLC
I/O connectors
* A recognized address means the first digit of a unit address (address set by the address setting switch).
70
Description / Function
Displays the number of recognized PLC I/O connectors.
Displays the number of recognized nodes (number of I/O units
connected to the controller.)
Displays the recognized PLC I/O connector numbers from the
smallest number to the largest number.
Displays the recognized I/O connector address numbers from the
smallest number to the largest number.
key ) to switch the displayed numbers at a high speed.
key or
Number of connected nodes
(connected I/O units)
Recognized I/O unit addresses
Recognized PLC I/O
connector numbers
Decimal number Hexadecimal
display number display
： ：
： ：