Connector Output Unit - Panasonic S-LINK V User Manual

Connector output unit

(SL-VTP4J / VTP4E: 4-channel, SL-VTP8J / VTP8E: 8-channel)
● Part description
6 5
3 2
No. Designation
1 Output device connector
2 Address setting switches
Output holding function
3
setting switch
4 Power indicator (Green)
5 Output indicators (Orange)
Transmission indicator
6
(Green)
<SL-VTP4J>
4
<SL-VTP8J>
Used for connection of the output device.
Used for setting of address.
Used for setting of the output holding function.
ON: Holds the current output conditions (output holding).
OFF: Will not hold the current output conditions (output OFF).
This indicator will light up when the power is supplied.
Each indicator will light up when the output signal of the corresponding channel is turned ON.
This indicator will blink when the synchronization signal is sent from the S-LINK V controller.
<SL-VTP4E>
1
<SL-VTP8E>
1
Function
Specifications
1
1
111