Analogue Output Unit - Panasonic S-LINK V User Manual

Analogue output unit

● Part description
No. Description
1 Terminal block connector
2 Address setting switch
3 Output hold setting switch
4 Power indicator (Green)
Transmission indicator
5
(Green)
７
６
５
1
４
３
２
１
０
I Current output terminal (4 to 20mA)
COM Analogue GND
V1 Voltage output terminal (+1 to +5V)
COM Analogue GND
V2 Voltage output terminal (0 to +10V)
COM Analogue GND
V3 Voltage output terminal (±10V)
COM Analogue GND
Address is set.
It is used to set the output hold function.
Lights up when the power is ON.
Blinks when the synchronization signal is sent from the S-LINK V controller
2 3
4 5
Function
Specifications
127