Input Module - Panasonic S-LINK V User Manual

Input module

(SL-VM8: 8-channel, SL-VM16: 16-channel)
● Specifications
Type
Model No.
Supply voltage
Current consumption
(24V DC)
Address setting
Input
Number of input points
Ambient tempera-
ture
Ambient humidity
Noise immunity
Vibration resis-
tance
Weight
Notes: 1) This value does not include the current consumption of the connected input device.
2) The power supply circuit of this product does not have any short-circuit protective function. Adopt a short-circuit protective function,
such as a fuse, for the power supply circuit.
3) In some cases, you cannot install the same SL-VM16 units close to each other, or SL-VM16 unit and SL-VMP16 unit close to each
other. The distance between these units depends on the ambient temperature.
While referring to the following figure, secure enough distance between the units.
8-channel
SL-VM8
24V DC±10% (Supplied from S-LINK V controller or separate power supply)
18mA or less (Note 1)
Photo-coupler input:
• Current input: 6mA or less
• Operation voltage:
ON voltage: 17V or more [between COM. (+) and IN]
OFF voltage: 4V or less [between COM. (+) and IN]
• Input impedance: Approx. 6.5kΩ
8 points
-10 to +55°C (No dew condensation or icing allowed), Storage: -20 to +70°C
Power line: 500Vp, 10ms cycle, 1µs pulse width
Common: 1,000Vp, 10ms cycle, 1µs pulse width (with noise simulator)
10 to 150Hz frequency, 0.75mm amplitude or maximum acceleration 49m/s² in X, Y and Z directions for two
hours each
16
12
8
4
Units
0
0
-10
Ambient temperature (°C)
0 to 511 (Set by No.19 to 28)
35 to 85% RH,Storage: 35 to 85% RH
Approx. 15g
L≥50
L=40
L=30
L=20
L
10 20 30 40 50 55
Specifications
16-channel
SL-VM16
20mA or less (Note 1)
16 points
135