Installation Method Of Batteries - Panasonic S-LINK V User Manual

Installation method of batteries

The address setting remote controller SL-VAR1 requires two AAA alkaline batteries.
For a detailed description to install the batteries, refer to following procedure.
CAUTION
Be sure to turn OFF the power of the product before installing or replacing the batteries.
1.
Remove the body from the silicon cover.
2.
Slide the battery cover on the back side of the body to remove the cover.
3.
Pay attention to the "+" and "-" directions, and install the AAA alkaline batteries into the battery box.
4.
Slide the battery cover onto the body to attach the cover.
5.
Turn over the body and insert it into the silicon cover.
The body
Silicon cover
Remove
Push
Slide
Battery cover
AAA alkaline battery
Battery cover
Slide
The body
Silicon cover
Fixing
Construction
59