Relay Output Terminal - Panasonic S-LINK V User Manual

Specifications

Relay output terminal

(SL-VTPR4: 4-channel, SL-VTPR8: 8-channel)
● Part description
<SL-VTPR4>
4-core flat cable, 0.6m long
1
2
3
4
6
No. Designation
1 Address setting switches
Output holding function
2
setting switch
3 Power indicator (Green)
Transmission indicator
4
(Green)
Operation indicator
5
(Orange)
6 Relay remover key
7 Output relay
8 Terminal block
Note: You can replace the output relays.
132
5
7
8
Used for setting of the terminal address.
Used for setting of the output holding function.
ON: Hold the current output conditions (output holding).
OFF: Will not hold the current output conditions (output OFF).
This indicator will light up when the power is supplied.
This indicator will blink when the synchronization signal is sent from the S-LINK V controller.
Lights up when each output relay is turned ON.
Use this key to remove the output relays.
PA-N relay APAN3124 manufactured by Panasonic Corporation. (Note)
Used for connection of output devices.
<SL-VTPR8>
4-core flat cable, 0.6m long
1
2
3
4
6
Function
5
7
8