End Unit - Panasonic S-LINK V User Manual

End unit

Each unit of the S-LINK V system needs at least one end unit.
● Part description
No. Designation
1 Power indicator (Green)
Signal line connection
2
indicator (Orange)
● Specifications
Designation
Model No.
Supply voltage
Current consumption
Power indicator
Signal line connection indicator
Ambient temperature
Ambient humidity
Noise immunity
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Mounting
Tightening torque
Material
Cable
Weight
Accessory
Note: If this product is stored in the control panel together with the other units, the temperature may rise above the specified operation tempera-
ture due to the heat generated by the other units.
In this case, install a cooling fan, etc. so that the ambient temperature can be in the specified range.
This indicator will light up when the power is supplied.
This indicator will light up when the signal waveform is confirmed.
Green LED (lights up when the power is supplied)
Orange LED (lights up when the signal waveform is confirmed)
-10 to +55°C (No dew condensation or icing allowed), Storage: -20 to +70°C
Power line: 500Vp, 10ms cycle, 1µs pulse width
Common: 1,000Vp, 10ms cycle, 1µs pulse width (with noise simulator)
1,000V AC for one min. between all terminals connected together and enclosure
20MΩ, or more, with 500V DC megger between all terminals connected together and enclosure
10 to 150Hz frequency, 0.75mm amplitude or maximum acceleration 49m/s² in X, Y and Z directions for two
hours each
2
490m/s acceleration (approx. 50G) in X, Y and Z directions for three times each
Mounted on DIN rail or by tightening screws (Using MS-CH)
Enclosure: Polycarbonate, DIN rail mounting holder: ABS
1
2
Function
End Unit
SL-VEU
24V DC±10%
10mA or less
35 to 85% RH, Storage: 35 to 85% RH
MS-CH: 1.2N·m or less
2
0.5mm 4-core flat cable, 0.6m long
Approx. 45g (including MS-CH)
MS-CH (DIN rail mounting holder): 1 pc.
Specifications
147