Panasonic S-LINK V User Manual page 68

Starting
Mode setting Operation
In the CONFIG mode,
turn on the power.
Press ENTER key.
Press
key or
Press ENTER key.
Press key.
Press ENTER key.
Press
key or
Press ENTER key.
Press key.
Press ENTER key.
Press
key or
Press ENTER key.
Same as error 1 output
operation
Switching in the order
of errors 2, 3, 4, and 5
68
Displays the current transmission mode.
Blinks the displayed current transmission mode.
key. Selects the transmission mode from the three types (A mode,
B mode and C mode ), and then displays the selected mode.
Determines the transmission mode.
Displays the number of I/O control points.
Blinks the displayed number of I/O control points.
key. Selects the number of I/O control points in the range of 32 to
512 points. Selection is possible in increments / decrements
of 32 points.
Determines the number of I/O control points.
Displays the error 1 output operation.
Blinks the displayed error 1 output operation.
key. Selects the external output type for the detected error from
the following three types:
: Turns off the error output 1 of the controller.
: Turns off the error output 2 of the controller.
: Will not turn off any error output.
Determines the error 1 output operation.
Same as error 1
Description / Function Indication
e.g.)
If A mode is
selected:
If B mode is
selected:
If C mode is
selected:
e.g.)
e.g.)
If 512 points is
selected:
If 32 points is
selected:
e.g.)
e.g.)
Error output 1
Error output 2
No error output
e.g.)
Same as error 1