List Of Connectors; Handy Monitor; Address Setting Remote Controller - Panasonic S-LINK V User Manual

List of connectors

Designation
Hook-up connector
Hook-up connector for cable
extension
Hook-up connector for cable
end
Hook-up connector for 'T' -
branch
Snap male connector
Snap female connector
We can provide connectors in units of 10-connector sets.
NOTE
If you need connectors, please let us know how many sets you need (1 set: 10 pcs.)

Handy monitor

Designation
Handy monitor

Address setting remote controller

Designation
Address setting remote
controller
Model No.
This connector enables a 'T' - branch of the exclusive 4-core flat cable.
SL-J1A
2
For 0.5mm to 0.5mm
Used for extension of the exclusive 4-core flat cable.
SL-J3A
2
For 0.5mm to 0.5mm
If the snap male connector (SL-CP□) is used together, this hook-up connector
SL-JK (SL-JK) enables connection of the I/O unit to the end of the exclusive 4-core flat
cable (0.5mm
If the snap male connector (SL-CP□) is used together, this hook-up connector
SL-JK1 (SL-JK1) enables connection of the I/O unit to any point of the exclusive 4-core flat
cable (0.5mm
For 0.08 to 0.2mm
SL-CP1 Lead wire diameter: ø0.7 to ø1.2mm
(White)
2
For 0.3mm
SL-CP2 Lead wire diameter: ø1.1 to ø1.6mm
(Black)
2
For 0.5mm
SL-CP3 Lead wire diameter: ø1.7 to ø2.5mm
(Bluish green)
For 0.08 to 0.2mm
SL-CJ1 Lead wire diameter: ø0.7 to ø1.2mm
(White)
2
For 0.3mm
SL-CJ2 Lead wire diameter: ø1.1 to ø1.6mm
(Black)
Model No.
This monitor can be connected to any point of the signal transmission line, and en-
ables monitoring of the I/O conditions in units of 16 points.
SL-VHM1 In addition, this monitor is incorporated with the S-LINK V controller functions. For
this reason, even in the middle of installation work, this monitor can carry out I/O
check for a divided conveyor, or the like, without activating the S-LINK V controller.
Model No.
This remote controller is designed specifically to select the SL-VPK0□ address and
SL-VAR1 lamp color and to change its address offset.
It can also send and receive all settings at once using infrared communications.
Description
2
(Gray)
2
(Black)
2
). (Light blue)
2
). (Blue)
2
Used for connection of the I/O device to the
SL-VT□J / SL-VTP□J connector I/O unit or con-
nection of the S-LINK V I/O unit to the SL-JK /
SL-JK1 hook-up connector.
2
Used for connection to the SL-CP□ snap male
connector.
Description
Description
List of Models
159