Panasonic S-LINK V User Manual page 40

Basic Procedures
3.
Place the housing on the cover, and then lightly press the cover to temporarily fix it.
Cover
● If the housing is placed in a wrong direction, it will not be engaged with the cover.
NOTE
● If the connector is attached to the cable end, check the cable condition through the confir-
mation window. The cable should be in contact with the back of the connector.
4.
Hook-up the connector using the exclusive hook-up pliers (SL-JPS).
For the caution regarding the exclusive hook-up pliers and the hook-up procedure, refer to pages 37,
38.
5.
Check the hook-up condition of the connector.
<Check items>
● Check that the claws of the housing are properly pressed to the cover.
● If the connector is attached to the cable end, check the condition of the main / branch line flat cable through
the confirmation window. The cable should be in contact with the back of the connector.
40
Housing
*Check the engagement condition
Protrusion
Claw
Confirmation window
Claw
Confirmation window
Confirmation window
Protrusion