Panasonic S-LINK V User Manual page 42

Basic Procedures
3.
Place the housing on cover
● If the housing is placed in a wrong direction, it will not be engaged with the cover.
NOTE
● Check the cable condition through the confirmation window.
The cable should be in contact with the back of the connector.
4.
Place another flat cable on cover
the cable stopper.
<SL-J1A>
Cable stopper
42
, and then lightly press the cover to temporarily fix it.
Cover
A
Guide
Groove
(for the SL-J3A, touch the cable to the wall), and then fix cable using
Touch the cable to the cover,
and then fix the cable.
Cover
A
Check that the guide is properly engaged
with the groove.
Confirmation window
<SL-J3A>
Confirmation window
Housing
Cable stopper