Cj1 And Sl-Cj2 Snap Female Connectors - Panasonic S-LINK V User Manual

Basic Procedures
Hook-up method of SL-CP1, SL-CP2, and SL-CP3 snap male connectors
and SL-CJ1 and SL-CJ2 snap female connectors
CAUTION
● Before starting the snap male / female connector hook-up work, fully understand the hook-up work
and the setup work (See pages 37, 38 and 44, 45).
● Do not use the single-core cable, but use the stranded cable.
● Use the cable having a vinyl chloride or soft polyethylene insulator.
Do not use the cable if the insulator is irradiated or cross-linked (hard type).
● Do not use the cable if the diameter is not specified in the following table.
1.
For the cable, select a connector applicable for the conductor cross section and the lead wire diameter of
the cable.
<Snap male connector>
Applicable connector
SL-CP1
White
SL-CP2
SL-CP3
Bluish
green
<Snap female connector>
Applicable connector
SL-CJ1
SL-CJ2
44
Color Conductor cross section
2
0.08 to 0.2mm
(AWG28 to AWG24)
2
0.3mm
Black
(AWG22)
2
0.5mm
(AWG20)
Conductor cross section
Color Conductor cross section
2
0.08 to 0.2mm
White
(AWG28 to AWG24)
2
0.3mm
Black
(AWG22)
Lead wire diameter Allowable overcurrent
ø0.7 to ø1.2mm
ø1.1 to ø1.6mm
ø1.7 to ø2.5mm
Lead wire diameter
Lead wire diameter Allowable overcurrent
ø0.7 to ø1.2mm
ø1.1 to ø1.6mm
Allowable voltage
1A
2A 30V DC
3A
Allowable voltage
1A
30V DC
2A