Panasonic S-LINK V User Manual page 49

● To install the picking switch SL-VPK0□ on the pipe:
1. Remove the socket head hex bolt used for fixing the holder [M6 (length 15 mm)].
When doing this, remove the pipe mounting holder as well.
2. Align the connecting piece of the product with the connecting piece of the pipe mounting holder so that the
pipe is gripped between these pieces.
You can align the connecting pieces easily by shifting them up and down during alignment work.
3. Install the product using the socket head hex bolt for fixing the holder that you removed in step 1.
2. Align the respective connecting pieces.
Holder-fixing socket head hex bolt
[M6 (length 15 mm)]
● To attach a shutter on the picking switch for shutter, SL-VPK02:
Attach the shutter to the movable arm on this product.
Use the accessory arm plate, plate-fixing screws [M4 truss head screws (length: 12mm)], and plate-fixing
spring washers to attach the shutter.
Plate-fixing screw
[M4 truss head screw (length: 12mm)] (Accessry)
1. Fit over the pipe.
3. Tighten the bolt.
This product
Arm plate (Accessry)
Plate-fixing spring washer (Accessry)
Basic Procedures
Pipe mounting holder
Pipe
This product
Movable arm
Shutter
49