Controller; Control Board; Control Module - Panasonic S-LINK V User Manual

Controller

Designation
S-LINK V controller
Bus direct-connection type
S-LINK V controller for FP2 /
FP2SH series
Bus direct-connection type S-
LINK V controller for MEL-
SEC-Q series PLC manufac-
tured by Mitsubishi Electric
Corp.
S-LINK V gateway controller
for CC-Link
S-LINK V gateway controller
for DeviceNet
S-LINK V gateway controller
for EtherCAT
S-LINK V gateway controller
for RS-485 / RS-232C

Control board

Designation
S-LINK V control board for
PCI bus
S-LINK V control board for
VME bus

Control module

Designation
S-LINK V control module
Model No.
This controller controls the signal transmission of the entire system. In addition, this
controller always monitors the signal transmission line. If a problem, such as discon-
SL-VCU1
nection, is detected, the controller will localize the problem point, and displays the
error address.
SL-VFP2 This controller can be directly connected to the bus line of the FP2 series.
This controller can be directly connected to the bus line of the MELSEC-Q series
SL-VMEL-Q
PLC manufactured by Mitsubishi Electric Corp.
This S-LINK V gateway controller conforms to the specifications of the CC-Link open
SL-VGU1-C
network proposed by CC-Link Association.
This S-LINK V gateway controller conforms to the specifications of the DeviceNet
SL-VGU1-D
open network proposed by ODVA.
This S-LINK V gateway controller conforms to the specifications of the EtherCAT
SL-VGU1-EC
open network proposed by ETG.
This S-LINK V gateway controller conforms to the specifications of the RS-485 / RS-
SL-VGU1-485
232C.
Model No.
Insert this control board into the extension slot (PCI bus) of the personal computer to
SL-VPCI
control the S-LINK V system.
This control board is directly connected to the VME bus line to control the S-LINK V
SL-VVMES2
system. Since this control board is incorporated with 2 ports (512 points, each) for I/O
machines, use of this control board enables control of up to 1,024 points of I/O devices.
Model No.
This is a hybrid IC module. The S-LINK V controller is mounted on the printed circuit
SL-VMC1
board. This module enables free designing of the system.
List of Models
Description
Description
Description
157