Panasonic S-LINK V User Manual page 11

Chapter 4 Specifications
● Select S-LINK V units optimum for the purpose of your system.
● S-LINK V control units
● S-LINK V input units
● S-LINK V output units
● Hook-up connector
● Exclusive 4-core flat cable
Chapter 5 Troubleshooting
● This chapter describes how to solve the problem if the S-LINK V system does
not operate properly.
● Troubleshooting after error indication
● Power supply check procedure
● How to extinguish the error indicators
Appendix
● List of error numbers
● Flowchart for error detection
● Selection of connector link cable for PLC
● Fax sheet for asking questions
This manual is prepared for the designer and the installer of the S-LINK V system. The following items are com-
mon to both the designer and the installer:
● Before Using This System
● 'Chapter 4 Specifications'
● 'Chapter 5 Troubleshooting'
● Appendix
In addition, the designer should refer to 'Chapter 1 Designing System,' and the installer should refer to
'Chapter 2 Wiring' and 'Chapter 3 Starting System.'
Designing / Installation Procedures
11