Panasonic S-LINK V User Manual page 81

● Main specifications
Type
Model No.
Supply voltage (Note 1)
Current consumption
Allowable passing current
Number of I/O points
Number of connected
nodes
Combination of inputs and
outputs
Power supply
Transmission
Error Red LED (lights up when an error occurs. Blinks when the error is eliminated. Lights off when operation is nomal.)
Hexadecimal number
Address display 3 digit red LED display (displays the number of connected nodes, recognized addresses, error addresses, etc.)
Applicable PLC
Unit type
Number of occupied
points
Ambient temperature
Ambient humidity
Noise immunity
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Grounding method
Material
Weight
Terminal block
Notes: 1) 24V DC and 5V DC are insulated.
2) The current consumption shown in the above table is the current consumption of the controller, but does not include that of the S-LINK V
I/O units.
3) This product is not equipped with any short-circuit protective function.
For this reason, select a power supply unit having short-circuit protective function (fuse, etc.).
Bus direct-connection type S-LINK V controller for FP2 / FP2SH Series
Inputs and outputs can be set in units of 32 points.
Green LED (lights up when 5V DC is supplied from the FP2 bus side)
Green LED (lights up when the hexadecimal number display mode is selected to display the addresses)
FP2 [manufactured by Panasonic Industrial Devices SUNX Co., Ltd.]
0 to +55˚C (No dew condensation), Storage: -20 to +75˚C
Power line: 500Vp, 10ms cycle, 1µs pulse width
Common: 1,000Vp, 10ms cycle, 1µs pulse width (with noise simulator)
1,000V AC for one min. between all terminals connected together and enclosure
20MΩ, or more, using 500V DC megger between all terminals connected together and enclosure
10 to 150Hz frequency, 0.75mm amplitude or maximum acceleration 9.8m/s
times each
147m/s
F.G. terminal: C-connection, Enclosure: Floating
Enclosure: Polycarbonate + PBT alloy, Display part: Polycarbonate
Terminal block connector ECH381RM-07P (manufactured by DINKLE ENTERPRISE CO., LTD.)
SL-VFP2
[S-LINK V system side] 24V DC
[FP2 side] 5V DC±5%
[24V DC] 60mA or less (Note 2)
[5V DC] 150mA or less
7A or less (Note 3)
32 to 512 points (Set in units of 32 points)
Maximum 256 nodes
Green LED (blinks during transmission)
FP2 intelligent units
Input: 16 points, Output: 16 points
5 to 95% RH, Storage: 5 to 95% RH
2
in X, Y, and Z directions for three times each
Approx. 160g
Specifications
%
+10
− 5
2
in X, Y and Z directions for ten
81