Unit Memory Addresses; Allocation Of Unit Memory Addresses; Bit Settings In Unit Memory Areas - Panasonic FP7 User Manual

Specifications
3)
Lower limit clipping flag

8.4 Unit memory addresses

8.4.1 Allocation of unit memory addresses

Setting item
Analog output processing
Range setting
Function setting
Offset value
Gain value
Scale conversion
Upper and lower limit
clipping
Digital input value in PROG mode

8.5 Bit settings in unit memory areas

Individual settings (settings per channel)
42
TRUE when the digital input value drops below the lower limit clipping val-
ue, provided that the clipping function is active.
There is no need to set unit memory values, because unit memory values
will be written automatically if they are set in the "Analog unit settings" di-
alog of Control FPWIN Pro. To change parameters by user program, write
the desired value to the parameter's unit memory address.
Offset/gain processing
Scale conversion
Upper and lower limit clipping
Analog output in PROG mode
Upper limit of scale
Lower limit of scale
Upper limit clipping value
Lower limit clipping value
The unit memory addresses are listed in ascending order for the supported
channels (e.g. first unit memory address applies to channel 0, second to
channel 1 etc.).
Unit memory address
Channel 0 Channel 1 Channel 2 Channel 3
UM00108 UM00118
UM00109 UM00119
UM0010A UM0011A
UM0010B UM0011B
UM0010C UM0011C
UM0010D UM0011D
UM0010E UM0011E
UM0010F UM0011F
UM00110 UM00120
UM00111 UM00121
FP7 Analog Output Unit User's Manual
See p. 36.
UM00128 UM00138
UM00129 UM00139
UM0012A UM0013A
UM0012B UM0013B
UM0012C UM0013C
UM0012D UM0013D
UM0012E UM0013E
UM0012F UM0013F
UM00130 UM00140
UM00131 UM00141