Troubleshooting your Avaya CallPilot
To determine if it is safe to remove the 202i server from the switch, see
indications
Power status LED functions
The LED indicates two server states:
• The 202i server is in use.
• It is safe to remove the 202i server from the switch.
Power status LED indications
IF the power status LED
On
Off
20
Avaya CallPilot 202i Server Maintenance and Diagnostics
®
system
on page 20.
is
the server is receiving power from the shelf. It is safe to remove it
from the switch.
Note:
When the LED is lit, the HEX display may display one of the
following: T:XX, F:XX, HOST, or DOWN.
Caution:
Risk of equipment damage or data loss
It is not safe to remove the server from the switch. The server
is in one of the following states:
• The server is in the operating system startup sequence.
• The server has completed the startup sequence and is
running.
You must courtesy down Avaya CallPilot, and then shut
down the operating system before you can remove the
202i server from the switch. For instructions, see
"Powering down the server" in the Avaya CallPilot
Installation and Configuration Task List. NN44200-306.
THEN
Note:
Power status LED
December 2010