Overview Of Setup Procedure - Nikon Eclipse TI-TIRF-E Setup Manual

2.2

Overview of Setup Procedure

Setting Up the PC and
1
Operation Software
(Chapter 3)
2
Setting Up the Microscope
(Chapter 4)
3
Laser Unit (Chapter 5)
4 Connection between the Laser
Unit and the Microscope
(Chapter 6)
Confirmation and
5
Check Sheet
(Chapter 7)
Chapter 2 Preparations
2.2 Overview of Setup Procedure
• Attaching the light source (TI-TIRF, TI-TIRF-E, or TI-PAU)
• Attaching the dichroic mirror (TI-PAU only)
• Attaching the epi-fl filter turret (TI-FLC, TI-FLC-E, or
TI-FLC-E/HQ)
• Assembling the microscope
• Attaching the field diaphragm unit
• Attaching the laser safety cover (TI-TIRF or TI-TIRF-E)
• Mounting the filter cubes
• Attaching the camera
• For two-laser unit and three-laser unit
• For three-laser unit EX
• For the four-laser module A
• For the four-laser PS rack
• Connection to the Shutter Unit
• Connection to the fiber light source (TI-TIRF, TI-TIRF-E, or
TI-PAU)
• Replacing the optical path switch mirror (if necessary)
• Laser safety check
• Check sheet entry
1-69