Lu4A Four-Laser Module A (With Lu4-B5 Beamsplitter 50/50 Installed) - Nikon Eclipse TI-TIRF-E Setup Manual

1.3.3

LU4A Four-laser Module A (with LU4-B5 Beamsplitter 50/50 installed)

The following safety labels are affixed to the product. Before using the product, check that individual labels
are affixed at their correct positions.
(1) IEC warning label - laser hazard symbol
CAUTION – CLASS 3B
LASER RADIATION WHEN OPEN
AVOID EXPOSURE TO THE BEAM
VORSICHT
– LASERSTRAHLUNG KLASSE 3B,
WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHL AUSSETZEN
(11) (1)
* For the laser path inside the laser unit, see Section 1.2.1, "Laser Unit."
Chapter 1 System Configurations and Part Names
1.3 Safety Labels
Figure 1.3-4
(11) IEC caution label - Class 4 area
This Class A digital apparatus complies
with Canadian ICES-003.
Cet appareil numerique de la classe A est
conforme a la norme NMB-003 du Canada.
This device complies with Part
15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) this device may not cause LU4A
harmful interference,and
NIKON CORPORATION, JAPAN
(2) this device must accept any
interference received, including
interference that may 100-240V~ 50/60Hz
60001
cause undesired operation. 2A-1A
2-10