Nikon Eclipse TI-TIRF-E Setup Manual page 55

TI-TIRF illuminator unit
(7) Condenser lens locking screw
(3) Laser position adjustment knob
(for forward and backward
adjustment)
(1) Optical fiber
(2) Laser position adjustment knob
(for right and left adjustment)
(8) Field diaphragm centering screws
(9) Field diaphragm open/close lever
Parts used in the TIRF microscopy operation
(1) Optical fiber
(2) Laser position adjustment knob
(for right and left adjustment)
(3) Laser position adjustment knob
(for forward and backward adjustment)
(4) ND filter sliders
(5) Mirror switching lever
Push in: TIRF (60%) and Epi (40%)
Pull out: TIRF (100%)
(6) Focal point adjustment knob
(7) Condenser lens locking screw
Chapter 1 System Configurations and Part Names
1.4 Name of Each Part
(6) Focal point adjustment knob
(4) ND filter sliders
N
D
2 N
D N
8 D
16
Figure 1.4-3
(5) Mirror switching lever
Push in: TIRF (60%) and Epi (40%)
Pull out: TIRF (100%)
Parts used in the epi-fl microscopy operation
(8) Field diaphragm centering screws
(9) Field diaphragm open/close lever
(10) Aperture diaphragm centering screws
(11) Aperture diaphragm open/close lever
(12) ND filter sliders
(13) Excitation filter slider
(14) Connector for the HG fiber light source
adapter
1-41
(12) ND filter slider
(14) Connector for the
FIL TE R
ND 8
ND 4
N
D
A. S. 8
N
D
4
(13) Excitation filter slider
(10) Aperture diaphragm
centering screws
(11) Aperture diaphragm
open/close lever
HG fiber light
source adapter