Table of Contents
Advertisement
Adjustment screw on the H fiber side
Adjustment screw on the V fiber side
Figure 5.4-94
2
Attaching the fiber coupling
Figure 5.4-95
Tool hole
Key groove
Figure 5.4-96
Chapter 5 Laser Unit
5.4 LU4A Four-laser Module A
6.
Rotate the adjustment screws "H" and "V" at the
optical fiber side to maximize the laser intensity.
7.
Repeat Step 5 and Step 6 to maximize the laser
intensity.
1.
Close all laser shutters.
2.
Attach the optical fiber coupling device. The tool hole
must face upward and the key groove must be on
the right viewed from the front side of the fiber
coupling device. Tighten three screws to fix it.
1-190
Hide quick links:
Advertisement
Table of Contents
