Nikon Eclipse TI-TIRF-E Setup Manual page 65

Laser safety cover
Figure 1.4-25
TI-S-ER Motorized
Stage with Encoders/
TI-S-E Motorized Stage
Piezo Z stage
Figure 1.4-27
Chapter 1 System Configurations and Part Names
1.4 Name of Each Part
Laser safety cover
Coars e
Fine
ExFin e
Obj.
ON/O FF
6V30W
12V100W
MAX.
Laser safety
cover
TI-TIRF-LSC Laser
Safety Cover/PZT
The cover prevents laser light from leaking. If the
laser safety cover is not attached, the motorized
shutters of the laser unit do not open.
Safety interlock (both sides)
* If the safety interlock part is touched or gotten
wet, misoperation may occur.
When using piezo-stages:
To use the piezo-stage together, the TI-TIRF-LSC Laser
safety cover/PZT is necessary. For how to attach the
TI-TIRF-LSC Laser safety cover/PZT, see "Setup
procedure and cautions" supplied with the TI-TIRF-LSC
Laser safety cover/PZT. Even when the TI-TIRF-LSC
Laser safety cover/PZT is attached, the motorized
shutters of the laser unit do not open unless the laser
safety cover is attached.
* If the safety interlock part is touched or gotten
wet, misoperation may occur.
1-51
Upper cover
Body
Figure 1.4-26