5.3.7
Adjusting the AOM Controller (When the AOM Unit Used Only)
1
Adjusting the AOM controller bias
Figure 5.3-78
2
Attaching the AOM controller cover
1.
Attach the cover to the AOM controller.
2.
Turn on the [REMOTE] switch on the rear of the AOM controller.
This completes the AOM controller adjustment.
Chapter 5 Laser Unit
5.3 C-LU3EX Three-laser Unit EX
For the adjustment work, the "Ti Tool" of the "Ti Setup
Tool Software" is required.
1-154