Nikon Eclipse TI-TIRF-E Setup Manual page 293

10
Affix the labels.
After confirming the safety of the laser (p.2-64 to 2-66), affix the specified warning labels to the
locations shown below.
Left side of microscope main unit
Affix "(7) IEC caution label - Class 3B area" on the left side of the microscope main unit, under the field
diaphragm.
Both sides of microscope main body
Affix "(7) IEC caution label - Class 3B area" and "(9) IEC aperture label 2" above the right and left ports
of the microscope main unit.
On 100W dia pillar illuminator
Affix "(7) IEC caution label - Class 3B area" on the dia pillar illuminator 100W.
Chapter 4 Setting Up the Microscope
4.2 Setup Procedure
(7)
(7)
(9) (both sides)
Figure 4.2-10
2-35
ON
OFF
6V30 W
12V1 00W
MAX.
(7) (both sides)