Nikon Eclipse TI-TIRF-E Setup Manual page 274

TI-RCP remote control pad (When Ti-E or Ti-E/B used only)
TIRF Angle button
Figure 1.4-4
Laser safety cover
Figure 1.4-5
Chapter 1 System Configurations and Part Names
1.4 Name of Each Part
TIRF / EPI button
Laser safety cover
User can perform the following operations using
the remote control pad:
• TIRF/EPI button:
The optical path is changed between laser
irradiation (TIRF or PAU illumination) and
episcopic illumination.
• TIRF Angle button:
TIRF illumination position (illumination angle)
adjustment *
* The laser is adjusted right or left and the
illumination angle of TIRF illumination (total
reflection illumination) is adjusted.
The cover prevents laser light from leaking. If the
laser safety cover is not attached, the motorized
shutters of the laser unit do not open.
Safety interlock (both sides)
* If the safety interlock part is touched or gotten
wet, misoperation may occur.
2-16
Upper cover
Body
Figure 1.4-6