Nikon Eclipse TI-TIRF-E Setup Manual page 329

8.3 Safety Standards Compliance
Laser safety
CE marking
Other categories
Chapter 8 Specifications and Performance
8.3 Safety Standards Compliance
Table 8.3-1
• This product complies with IEC60825-1 Class 3B requirements.
• This product complies with FDA Class 3B requirements.
• This product meets EU Low Voltage Directive requirements.
• This product meets EU EMC Directive requirements. (EN61326)
• This product complies with FCC15B Class A requirements.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
• This product complies with Canadian EMI standards. (ICES-003 Class A)
Cet appreil numérique de classe A est conforme à la norme NMB-003 du
Canada.
• This product complies with Australian EMI standards. (AS/NZS CISPR11)
2-71