Nikon Eclipse TI-TIRF-E Setup Manual page 143

2
Installing the dichroic mirror centering tool (for the EX)
Spring unit
Figure 5.3-18
Dichroic mirror adjustment unit
Figure 5.3-19
Chapter 5 Laser Unit
5.3 C-LU3EX Three-laser Unit EX
1. Remove the screw, then remove the three dichroic
mirror adjustment spring units. Take care to keep the
springs from flying off.
2. Remove the two screws (total 6) on each unit, then
remove the three dichroic mirror adjustment units.
1-129