Nikon Eclipse TI-TIRF-E Setup Manual page 61

Laser safety cover
Figure 1.4-15
Laser safety kit
Protection plate
(for nosepiece)
Figure 1.4-17
Chapter 1 System Configurations and Part Names
1.4 Name of Each Part
Laser safety cover
Coars e
Fine
ExFin e
Obj.
ON / OFF
6V30W
12V100W
MAX.
Filter slider cover
Coars e
Fine
ExFin e
Obj.
ON / OFF
6V30W
12V100W
MAX.
Filter cube port cover
retaining plate
The laser safety cover prevents laser light from
leaking. If the laser safety cover is not attached, the
motorized shutters of the laser unit do not open.
Safety interlock (both sides)
* If the safety interlock part is touched or gotten wet,
misoperation may occur.
The laser safety kit is composed of the filter slider
cover, protection plate, filter cube port fixed plate, and
safety labels.
Before using the product, check that the part shown
in the left figure is attached.
* For the types and positions of safety labels, see
Section 1.3.2, "Ti-E Microscope Body."
1-47
Upper cover
Body
Figure 1.4-16