Nikon Eclipse TI-TIRF-E Setup Manual page 138

4
Attaching the black rings (provided)
Figure 5.3-4
Figure 5.3-5
5
Removing the fiber coupling
Figure 5.3-6
Chapter 5 Laser Unit
5.3 C-LU3EX Three-laser Unit EX
1. Remove the bolts and nuts attached at three
locations on the laser mounting position opening,
holding them to avoid dropping them.
2. Attach the black (sponge) rings provided, centering
them on the opening.
Remove the three external screws and remove the fiber
coupling. Handle the coupling carefully to prevent
contamination of the space inside.
1-124