Nikon Eclipse TI-TIRF-E Setup Manual page 324

3. Safety checks
No. Unit
1
2
Laser and
laser unit
3
4
5
6
7
8
9
Microscope
10
11
12
13
14
4. Power check
No.
1
Optical fiber efficiency:
2
Laser intensity ratio between incident light and outgoing light of the
3
single mode fiber
4
5
Laser intensity at aperture:
6
Maximum intensity of the laser emitted from the opening of the
7
nosepiece for each laser unit
8
Power meter
Chapter 7 Confirmation and Check Sheet
7.2 Check Sheet
Table 7.2-4
Is there a gap between the unit and laser head?
Is the protective cover securely attached?
Does any laser light leak from gaps in the protective cover?
Is the sheet metal cover attached?
Is the optical fiber securely fixed?
Are all the retaining screws on the accessories (Field diaphragm unit,
eyepiece tube, fluorescent lamp, nosepiece, condenser, diascopic
illumination) securely tightened?
Are objectives or caps mounted in all the openings in the nosepiece?
Are cameras or caps attached to all ports?
Does the motorized shutter on the laser unit close when the laser safety
cover is detached in TI-TIRF-PAU Illuminator?
Does the motorized shutter on the laser unit close when the optical path in
the microscope main unit is switched to the eyepiece?
Is the dia-illuminator 100W attached?
Is the protection plate attached between the epi-fl filter turret and the
nosepiece or between the epi-fl filter turret and the PFS nosepiece?
Is the lock attached after the filter cube port cover is attached?
Are labels affixed at the specified locations?
Table 7.2-5
Check items
Manufacturer:
Model name:
Serial number:
Calibration date:
2-66
Check items
L1:
L2:
L3:
L4:
L1:
L2:
L3:
L4:
Check
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Measured Value
%
%
%
%
mW
mW
mW
mW