Nikon Eclipse TI-TIRF-E Setup Manual page 301

Attaching the back port extension kit
When combined with the TIRF-PAU illuminator unit, you need to attach the TI-BP-EX back port extension kit
and shift the camera mount position backward.
1. Split the TI-BPU back port unit.
Remove the M4-10 hexagon socket head bolts (four) from the microscope connection side to split it.
2. Attach the extension tube (extension kit).
Use the M4-12 hexagon socket head bolts (four) supplied with the extension kit to secure the extension
tube on the back port unit (at the camera connection side).
3. Attach the back port unit (at the microscope connection side).
Use the M4-10 hexagon socket head bolts (four) that were removed in Step 1 to secure the back port
unit (at the microscope connection side) on the extension tube.
Chapter 4 Setting Up the Microscope
4.2 Setup Procedure
Hexagon socket head bolt
M4-12 (four)
(supplied with the extension kit)
Hexagon socket
head bolt
M4-10 (four)
Back port unit
(at the microscope
connection side)
Figure 4.2-21
2-43
Back port unit
(at the camera
connection side)
Extension tube
(extension kit)