Settings For Processing When Measurement Is Not Possible - Omron ZW-C1*T User Manual

Settings for Processing When Measurement Is Not Possible

Setting operation when measurement is not possible
Setting operation when measurement is not possible p.150
As an example, the following explains the procedure for setting processing for when measurement is not
possible to "CLAMP".
Operating procedure
Steps Key operation
1
2
3
4
ZW User's Manual
Display Description
Press and hold the
Press the
Press the
Select the operation when measurement is not possible.
KEEP: KEEP
CLAMP: CLAMP
The current setting value is displayed on the sub-display.
Press
In this example, select "CLAMP" and press the
key for two seconds to enter the FUN mode.
/ keys to select "I/O" and press the
/ keys to select "HLD.RST" and press the
/ key to enter editing mode and the sub-display blinks.
key.
key.
key.
Connecting Parallel I/O
273