Omron ZW-C1*T User Manual page 65

Important
• When a zero reset is executed, the analog output becomes the voltage or current value at the center of the two
preset points. Analog output becomes roughly 0 V or 12 mA when focus is not set.
Setting Monitor Focus p.140
• The Zero Reset function can also be executed by supplying a ZERO signal to the 20-pole terminal block.
20-pole terminal block p.40
ZERO input p.134
Canceling Zero Reset
1
Press and hold the
seconds.
Important
• The Zero Reset function can also be executed by supplying a ZERO signal to the 20-pole terminal block.
20-pole terminal block p.40
ZERO input p.134
ZW User's Manual
key for two
Perform the Zero Reset
63