Omron ZW-C1*T User Manual page 39

Important
• The connection adapter (ZW-XFC) comes packed together with the extension fiber cable (ZW-XF@@R).
• Never use any extension fiber cable and/or connecting adapter other than those specified in the above.
• Hold the combined length of the normal and extension fiber cables to no more than 32 m.
• Only one fiber cable is allowed to extend the normal fiber cable. Never use two or more extension fiber cable
connected together.
• Do not touch the end surface of a fiber cable, or the cable may be degraded in performance. Should the end surface
be touched or soiled, wipe the dirt away using a commercially available cleaner exclusive for fiber or dry and soft
cloth. Do not use a cloth moistened with alcohol, or the dirt may be reattached.
We recommend the following product as the fiber cleaner.
Point Item
Tip of fiber cable OPTIPOP R1
• Use the optional ZW-XCL when cleaning the groove of the fiber connector.
Fiber connector cleaner p.300
• The fiber cable and fiber connectors should not be left with their protective caps removed, not even for a short
period of time. Leaving them unprotected can let dirt get on the end surface and cause performance deterioration.
• Calibrate the Sensor Head after removing and inserting an optical fiber.
Calibrating Sensor Head p.38
ZW User's Manual
Model Manufacturer
ATC-RE-01 NTT Advanced Technology Corporation
37
Installation