Omron ZW-C1*T User Manual page 67

 Explorer pane
 Edit pane
 Task settings window : [Judgment]
1
Enter the [LOW threshold] and [HIGH thresh-
old].
Important
• Hysteresis (hysteresis width) can also be set to threshold values. Set hysteresis when measured values are
dispersed around a threshold value, and judgments are unstable, to prevent chattering.
Setting Operation at Judgment Output p.144
• Threshold values can also be adjusted by directly entering values in the RUN mode.
This helps you to make fine adjustments without shutting down the system.
Changing Threshold Values p.227
Note
Threshold Value Settings can also be set by the operating keys on the Sensor Controller.
9-10 Setting Threshold Value p.257
ZW User's Manual
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon ( )
Setting Threshold Value
65