Omron ZW-C1*T User Manual page 90

Performing Thickness Scaling
The thickness is measured at one position and offset values are set for that measured value.
Item Setting item
Thickness scaling Setting value
 Explorer pane
 Edit pane
 Task Settings window : [Scaling]
1
Select scaling ON/OFF from [Scaling].
2
Click [Auto setting].
The [Scaling] popup menu appears.
3
Select [Thickness scaling], and click [Next
>].
The [Scaling] popup menu display changes to
[Thickness settings].
4
Click [STOP] to fix the [Current value], set
[Set value] and click [Next >].
The [Scaling] popup menu display changes to
[Confirm the scaling parameters], and the span
and offset values are displayed.
Note
The current measured value is displayed at
[Current value], and is refreshed at 100 ms
cycles. When [STOP] is clicked, refreshing of the
[Current value] display stops. Clicking the
[STOP] button again resumes display refreshing.
5
Click [OK].
Note
Thickness scaling can also be executed by the operating keys on the Sensor Controller.
Performing Thickness Scaling p.243
88
Setting the Output Conditions
Setting value
-999.999999 to 999.999999 [mm]
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
Correct the measured value, and set the value to display.
)
ZW User's Manual