Omron ZW-C1*T User Manual page 252

Setting the Zero Reset Mode
Setting the Zero Reset Type p.103
As an example, here is an explanation of the procedure for selecting the "REAL" zero reset type setting.
Operating procedure
Steps Key operation
1 to 5 For moving to "ZERO", see steps 1 to 5 in p.248.
6
7
8
250
Setting the Output Conditions
Display Description
Press the
key.
Select the zero reset mode.
REAL: Real
HOLD: Hold
Select "REAL" as the zero reset type.
The current setting value is displayed on the sub-display.
Press
In this example, select "REAL" and press the
Press the
/ keys to select "TYPE" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
ZW User's Manual