Setting Communications Specifications (Rs-232C Communications) - Omron ZW-C1*T User Manual

Setting Communications Specifications (RS-232C Communications)

Setting Communications Specifications (RS-232C Communications) p.173
Operating procedure
Steps Key operation
1 to 3 For moving to "COM", see steps 1 to 3 in p.277.
4
5
6
7
8
9 Repeat steps 6 to 8 to set other items.
10
278
Connecting by No-protocol Communications
Display Description
Press the
Select the setting item:
BAUD.RT: baud rate
DATA: data length
PARITY: parity
STOP: stop bit
CS/RS: CS/RS control
In this example, press the
key.
Selects the data length.
The current setting value is displayed on the sub-display.
Press
Select the data length, and press the
Press the
Press the
Press and hold the
/ keys to select "RS232C" and press the
/ keys, select "DATA" and press the
/ key to enter editing mode and the sub-display blinks.
key to return to the previous menu.
/ keys to select "PARITY" and press the
key for two seconds to enter the RUN mode.
key.
key.
key.
ZW User's Manual