Omron ZW-C1*T User Manual page 150

1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
 Explorer pane
 Edit pane
 I/O Setting Screen
2
Select the decimal point digit from [Decimal
point digit].
Note
Decimal point digit can also be assigned with key operations on the Sensor Controller.
Decimal Point Digit Setting p.269
Output cycle setting
Sets the output cycle for binary output.
The output cycle can be set as an integer multiple of the measurement cycle.
Item Setting item
Binary output Output cycle
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
 Explorer pane
 Edit pane
 I/O Setting Screen
148
Parallel I/O connection
: [Bank] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Binary output]
Setting value
1 (Default value) to 100
: [Bank] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Binary output]
)
Description
The binary data is output at the interval "setting value 
measurement cycle".
)
ZW User's Manual