Setting The Material Of The Target To Measure - Omron ZW-C1*T User Manual

Setting the Material of the Target to Measure

Setting the material of the target to measure.
Item Setting item
Operation mode Material
 Explorer pane
 Edit pane
 Sensing settings window : [Operating mode]
1
Select the material of the target to measure
at [Material].
Important
Refer to p.286 for the linearity data of various materials according to each material setting.
Note
The material of the target to measure can also be set by the operating keys on the Sensor Controller.
Setting the Material of the Target to Measure p.228
ZW User's Manual
Setting value
Normal (default value)
Mirror
Rough
: [Bank] | [(Bank data name)] (double-click)
: [Sensing setting] icon (
Description
A measurement can be performed at specific linearity
regardless of the type of target to measure.
Usually, select this setting.
Select this mode when specular reflection (regular
reflection) occurs on the surface. (Glass, wafer, lustrous
metal, etc.)
Select this mode when diffuse reflection occurs on the
surface.
)
71
Setting Sensing