Omron ZW-C1*T User Manual page 37

Important
• Handling fiber cables
Use them in compliance with the following.
-Fiber cable bend radiuses must be at least 20 mm.
-Do not let bending cause stress at the connecting section of a fiber connector.
-Do not yank hard on a fiber cable.
-Do not step on a fiber cable or place anything heavy on it.
• Do not touch the end surface of a fiber cable, or the cable may be degraded in performance. Should the end surface
be touched or soiled, wipe the dirt away using a commercially available cleaner exclusive for fiber or dry and soft
cloth. Do not use a cloth moistened with alcohol, or the dirt may be reattached.
We recommend the following product as the fiber cleaner.
Point Item
Tip of fiber cable OPTIPOP R1
• Use the optional ZW-XCL when cleaning the groove of the fiber connector.
Fiber connector cleaner p.300
• The fiber cable and fiber connectors should not be left with their protective caps removed, not even for a short
period of time. Leaving them unprotected can let dirt get on the end surface and cause performance deterioration.
• Calibrate the Sensor Head after removing and inserting a fiber cable.
Calibrating Sensor Head p.38
ZW User's Manual
Model Manufacturer
ATC-RE-01 NTT Advanced Technology Corporation
35
Installation