Connecting Parallel I/O; Settings For Analog Output - Omron ZW-C1*T User Manual

9-12Connecting Parallel I/O

Settings for Analog Output

Setting the analog output destination
Setting the analog output destination p.138
As an example, here is an explanation of the procedure for outputting the voltage.
Operating procedure
Steps Key operation
1
2
3
4
5
6
264

Connecting Parallel I/O

Display Description
Press and hold the
Press the
Press the
Press the
Select the output destination.
VOLT: Voltage
CUR: Current
The current setting value is displayed on the sub-display.
Press
In this example, select "VOLT" and press the
Press the
key for two seconds to enter the FUN mode.
/ keys to select "I/O" and press the
/ keys to select "ANALOG" and press the
/ keys to select "V OR C" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
key.
key.
key.
ZW User's Manual